This post contains affiliate links for your convenience.
It’s that time of year again, time to start thinking of Halloween costumes! When a neighbor calls you up and asks for your help to make Care Bear costumes for her family, you rush over there! No questions asked. These costumes were fairly easy to make and no sewing was involved. Let us know if you spot a Care Bear family trick-or-treating around your neighborhood this year!
Step 1: If you can’t find a yellow sweatshirt and pants, buy a white sweatsuit and dye it. Fill a large bucket or sink with hot water and mix in a bottle of Rit liquid dye. If you use the powder dye, make sure to mix well before adding clothing to the water. Place sweatshirt and pants in the water and mix every 10 minutes for approximately 30 minutes or until you get your desired color (remember that once washed and dry the color will be a few shades lighter). You may want to place dish or latex gloves on before handling dyed clothing. Ring out the sweatsuit and rinse thoroughly. Place in the washer and do a rinse cycle, wash cycle and hang to dry.
Step 2: Measure the width of the sweatshirt and cut a white felt circle a few inches smaller than the sweatshirt. Cut a yellow felt circle several inches smaller than the first circle. We used 2 different sized bowls as our circle stencils. Glue the yellow circle in the center of the white circle using no-sew fabric glue.
Step 3: Outline the yellow circle with orange puff paint. Draw rays and a sun face using orange puff paint. Once dry, glue to the front of the sweatshirt.
Step 4: Cut 4 ear shapes with tabs at the bottom out of yellow felt, as shown below. Cut 2 smaller white inner-ear shapes with tabs at the bottom out of white felt, as shown below. It’s helpful to first make a template out of cardstock, especially if you are making multiple costumes. Cut a pipe cleaner to fit inside each ear, making sure that it doesn’t poke out of the tab part. Sandwich the pipecleaner in between 2 yellow ear shapes, using no-sew fabric glue to glue the pieces in place. Glue white inner-ear shapes to the front of each ear. Make sure not to glue the tabs together.
Step 5: Cut 2 slits, slightly smaller than the length of the ears, on each side of the hoodie part of the sweatshirt. It might be helpful to first try the hoodie on the person it’s intended for and make marks where the slits go, using a fabric pencil. Place ears inside slits, separating and gluing down tabs in the inside. For extra reinforcement, cut 2 small squares of yellow felt and glue down over tabs.
Step 6: Make a large pom pom out of yellow yarn and use no-sew fabric glue to attach to the back of the sweatshirt or pants as a tail. Cut a small red heart out of felt and glue to the side of the pom pom tail.
Care Bear Cloud Wagon Instructions: Cut 2 large foam core boards into cloud shapes. Glue chunks polyfill to the front of each cloud shape. Use 3m adhesive or duct tape to attach clouds to each side of the wagon.
Now prepare yourself for some major cuteness overload…
You might also enjoy these Halloween costume tutorials:
You Might Also Like
Latest posts by Vanessa (see all)
- Kid Friendly: Minecraft City Champs Tournament in Phoenix - October 17, 2017
- Halloween: Pumpkin Honey Beer Bread Recipe - October 17, 2017
- Disney: ABC The Mayor TV Show #ABCTVEvent #TheMayor - October 17, 2017
- Disney: #ThorRagnarokEvent Red Carpet Experience - October 16, 2017